GentooForum.de

Quellcode

000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 08a0)
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: ioport range 0x4000-0x407f has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4200-0x427f has been reserved
system 00:00: ioport range 0x4280-0x42ff has been reserved
system 00:01: ioport range 0x5000-0x503f has been reserved
system 00:01: ioport range 0x5500-0x553f has been reserved
system 00:02: iomem range 0xd1800-0xd3fff has been reserved
system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
system 00:02: iomem range 0xfc000-0xfffff could not be reserved
system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved
system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:02: iomem range 0x0-0x9ffff could not be reserved
system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved
system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:08.0
  IO window: d000-dfff
  MEM window: disabled.
  PREFETCH window: e2000000-e2ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1217k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1216555079.416:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:02:00.0
lp: driver loaded but no devices found
Linux agpgart interface v0.102
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
uvesafb: NVIDIA Corporation, NV34 Board - p162-1n , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:e340
uvesafb: pmi: set display start = c00ce376, set palette = c00ce3e0
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=8192
Console: switching to colour frame buffer device 160x64
fbcondecor: console 0 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 0
uvesafb: framebuffer at 0xd8000000, mapped to 0xf8900000, using 10240k, total 131072k
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0c:6e:af:95:93
forcedeth 0000:00:04.0: timirq lnktim desc-v1
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at  PCI slot 0000:00:09.0
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hdb: Maxtor 6L250R0, ATA DISK drive
hda: FUJITSU MPF3204AT, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/133 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: 32X10, ATAPI CD/DVD-ROM drive
hdc: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/66 mode selected
hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdd: MWDMA2 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63
hda: cache flushes not supported
 hda: hda1 hda2
hdb: max request size: 512KiB
hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
hdb: cache flushes supported
 hdb: hdb1 hdb2 hdb3 hdb4
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Driver 'sd' needs updating - please use bus_type methods
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 11, io mem 0xe3004000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 7, io mem 0xe3002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 5, io mem 0xe3003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using timer interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
logips2pp: Detected unknown logitech mouse model 62
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 7, latency: 32, mmio: 0xe2000000
bttv0: detected: Terratec TValue (LR102) [card=33], PCI subsystem ID is 153b:1134
bttv0: using: Terratec TerraTValue Version Bt878 [card=33,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffefff [init]
bttv0: tuner type=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 0-0060: type set to Philips PAL_BG (FI1
tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 0-0060: type set to Philips PAL_BG (FI1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5
NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
EXT3 FS on hda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004020k swap on /dev/hdb1.  Priority:-1 extents:1 across:1004020k
fbcondecor: console 1 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'emergence'
fbcondecor: switched decor state to 'on' on console 5
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode

Quellcode

Jul 20 13:58:37 localhost syslog-ng[5210]: syslog-ng starting up; version='2.0.9'
Jul 20 13:58:37 localhost CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 20 13:58:37 localhost CPU: L2 Cache: 512K (64 bytes/line)
Jul 20 13:58:37 localhost CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
Jul 20 13:58:37 localhost Intel machine check architecture supported.
Jul 20 13:58:37 localhost Intel machine check reporting enabled on CPU#0.
Jul 20 13:58:37 localhost Compat vDSO mapped to ffffe000.
Jul 20 13:58:37 localhost CPU: AMD Athlon(tm) XP 2500+ stepping 00
Jul 20 13:58:37 localhost Checking 'hlt' instruction... OK.
Jul 20 13:58:37 localhost Freeing SMP alternatives: 0k freed
Jul 20 13:58:37 localhost ACPI: Core revision 20070126
Jul 20 13:58:37 localhost ACPI: setting ELCR to 0200 (from 08a0)
Jul 20 13:58:37 localhost net_namespace: 64 bytes
Jul 20 13:58:37 localhost NET: Registered protocol family 16
Jul 20 13:58:37 localhost ACPI: bus type pci registered
Jul 20 13:58:37 localhost PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
Jul 20 13:58:37 localhost PCI: Using configuration type 1
Jul 20 13:58:37 localhost Setting up standard PCI resources
Jul 20 13:58:37 localhost ACPI: EC: Look up EC in DSDT
Jul 20 13:58:37 localhost ACPI: Interpreter enabled
Jul 20 13:58:37 localhost ACPI: (supports S0 S1 S5)
Jul 20 13:58:37 localhost ACPI: Using PIC for interrupt routing
Jul 20 13:58:37 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 20 13:58:37 localhost PCI: nForce2 C1 Halt Disconnect fixup
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APC2] (IRQs *17)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APC4] (IRQs *19)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCS] (IRQs *23)
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Jul 20 13:58:37 localhost Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 20 13:58:37 localhost pnp: PnP ACPI init
Jul 20 13:58:37 localhost ACPI: bus type pnp registered
Jul 20 13:58:37 localhost pnp: PnP ACPI: found 16 devices
Jul 20 13:58:37 localhost ACPI: ACPI bus type pnp unregistered
Jul 20 13:58:37 localhost SCSI subsystem initialized
Jul 20 13:58:37 localhost usbcore: registered new interface driver usbfs
Jul 20 13:58:37 localhost usbcore: registered new interface driver hub
Jul 20 13:58:37 localhost usbcore: registered new device driver usb
Jul 20 13:58:37 localhost PCI: Using ACPI for IRQ routing
Jul 20 13:58:37 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jul 20 13:58:37 localhost Time: tsc clocksource has been installed.
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4000-0x407f has been reserved
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4080-0x40ff has been reserved
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4400-0x447f has been reserved
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4480-0x44ff has been reserved
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4200-0x427f has been reserved
Jul 20 13:58:37 localhost system 00:00: ioport range 0x4280-0x42ff has been reserved
Jul 20 13:58:37 localhost system 00:01: ioport range 0x5000-0x503f has been reserved
Jul 20 13:58:37 localhost system 00:01: ioport range 0x5500-0x553f has been reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xd1800-0xd3fff has been reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xfc000-0xfffff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0x0-0x9ffff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
Jul 20 13:58:37 localhost system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
Jul 20 13:58:37 localhost system 00:04: ioport range 0x4d0-0x4d1 has been reserved
Jul 20 13:58:37 localhost PCI: Bridge: 0000:00:08.0
Jul 20 13:58:37 localhost IO window: d000-dfff
Jul 20 13:58:37 localhost MEM window: disabled.
Jul 20 13:58:37 localhost PREFETCH window: e2000000-e2ffffff
Jul 20 13:58:37 localhost PCI: Bridge: 0000:00:1e.0
Jul 20 13:58:37 localhost IO window: disabled.
Jul 20 13:58:37 localhost MEM window: e0000000-e1ffffff
Jul 20 13:58:37 localhost PREFETCH window: d8000000-dfffffff
Jul 20 13:58:37 localhost PCI: Setting latency timer of device 0000:00:08.0 to 64
Jul 20 13:58:37 localhost NET: Registered protocol family 2
Jul 20 13:58:37 localhost IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 20 13:58:37 localhost TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 20 13:58:37 localhost TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Jul 20 13:58:37 localhost TCP: Hash tables configured (established 131072 bind 65536)
Jul 20 13:58:37 localhost TCP reno registered
Jul 20 13:58:37 localhost checking if image is initramfs... it is
Jul 20 13:58:37 localhost Freeing initrd memory: 1217k freed
Jul 20 13:58:37 localhost Machine check exception polling timer started.
Jul 20 13:58:37 localhost audit: initializing netlink socket (disabled)
Jul 20 13:58:37 localhost audit(1216555079.416:1): initialized
Jul 20 13:58:37 localhost highmem bounce pool size: 64 pages
Jul 20 13:58:37 localhost Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul 20 13:58:37 localhost NTFS driver 2.1.29 [Flags: R/W].
Jul 20 13:58:37 localhost io scheduler noop registered
Jul 20 13:58:37 localhost io scheduler anticipatory registered (default)
Jul 20 13:58:37 localhost io scheduler deadline registered
Jul 20 13:58:37 localhost io scheduler cfq registered
Jul 20 13:58:37 localhost Boot video device is 0000:02:00.0
Jul 20 13:58:37 localhost lp: driver loaded but no devices found
Jul 20 13:58:37 localhost Linux agpgart interface v0.102
Jul 20 13:58:37 localhost agpgart: Detected NVIDIA nForce2 chipset
Jul 20 13:58:37 localhost agpgart: AGP aperture is 128M @ 0xd0000000
Jul 20 13:58:37 localhost uvesafb: NVIDIA Corporation, NV34 Board - p162-1n , Chip Rev   , OEM: NVIDIA, VBE v3.0
Jul 20 13:58:37 localhost uvesafb: protected mode interface info at c000:e340
Jul 20 13:58:37 localhost uvesafb: pmi: set display start = c00ce376, set palette = c00ce3e0
Jul 20 13:58:37 localhost uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Jul 20 13:58:37 localhost uvesafb: VBIOS/hardware doesn't support DDC transfers
Jul 20 13:58:37 localhost uvesafb: no monitor limits have been set, default refresh rate will be used
Jul 20 13:58:37 localhost uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=8192
Jul 20 13:58:37 localhost Console: switching to colour frame buffer device 160x64
Jul 20 13:58:37 localhost fbcondecor: console 0 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 0
Jul 20 13:58:37 localhost uvesafb: framebuffer at 0xd8000000, mapped to 0xf8900000, using 10240k, total 131072k
Jul 20 13:58:37 localhost fb0: VESA VGA frame buffer device
Jul 20 13:58:37 localhost input: Power Button (FF) as /class/input/input0
Jul 20 13:58:37 localhost ACPI: Power Button (FF) [PWRF]
Jul 20 13:58:37 localhost input: Power Button (CM) as /class/input/input1
Jul 20 13:58:37 localhost ACPI: Power Button (CM) [PWRB]
Jul 20 13:58:37 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jul 20 13:58:37 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 20 13:58:37 localhost serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 20 13:58:37 localhost 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 20 13:58:37 localhost 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 20 13:58:37 localhost Floppy drive(s): fd0 is 1.44M
Jul 20 13:58:37 localhost FDC 0 is a post-1991 82077
Jul 20 13:58:37 localhost RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
Jul 20 13:58:37 localhost forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
Jul 20 13:58:37 localhost PCI: setting IRQ 11 as level-triggered
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
Jul 20 13:58:37 localhost PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 20 13:58:37 localhost forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0c:6e:af:95:93
Jul 20 13:58:37 localhost forcedeth 0000:00:04.0: timirq lnktim desc-v1
Jul 20 13:58:37 localhost PPP generic driver version 2.4.2
Jul 20 13:58:37 localhost PPP Deflate Compression module registered
Jul 20 13:58:37 localhost PPP BSD Compression module registered
Jul 20 13:58:37 localhost NET: Registered protocol family 24
Jul 20 13:58:37 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 20 13:58:37 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 20 13:58:37 localhost NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at  PCI slot 0000:00:09.0
Jul 20 13:58:37 localhost NFORCE2: not 100% native mode: will probe irqs later
Jul 20 13:58:37 localhost NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jul 20 13:58:37 localhost NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jul 20 13:58:37 localhost NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Jul 20 13:58:37 localhost ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jul 20 13:58:37 localhost ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jul 20 13:58:37 localhost Probing IDE interface ide0...
Jul 20 13:58:37 localhost hdb: Maxtor 6L250R0, ATA DISK drive
Jul 20 13:58:37 localhost hda: FUJITSU MPF3204AT, ATA DISK drive
Jul 20 13:58:37 localhost hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 20 13:58:37 localhost hda: UDMA/66 mode selected
Jul 20 13:58:37 localhost hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 20 13:58:37 localhost hdb: UDMA/133 mode selected
Jul 20 13:58:37 localhost ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 20 13:58:37 localhost Probing IDE interface ide1...
Jul 20 13:58:37 localhost hdd: 32X10, ATAPI CD/DVD-ROM drive
Jul 20 13:58:37 localhost hdc: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
Jul 20 13:58:37 localhost hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 20 13:58:37 localhost hdc: UDMA/66 mode selected
Jul 20 13:58:37 localhost hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 20 13:58:37 localhost hdd: MWDMA2 mode selected
Jul 20 13:58:37 localhost ide1 at 0x170-0x177,0x376 on irq 15
Jul 20 13:58:37 localhost hda: max request size: 128KiB
Jul 20 13:58:37 localhost hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63
Jul 20 13:58:37 localhost hda: cache flushes not supported
Jul 20 13:58:37 localhost hda: hda1 hda2
Jul 20 13:58:37 localhost hdb: max request size: 512KiB
Jul 20 13:58:37 localhost hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
Jul 20 13:58:37 localhost hdb: cache flushes supported
Jul 20 13:58:37 localhost hdb: hdb1 hdb2 hdb3 hdb4
Jul 20 13:58:37 localhost hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Jul 20 13:58:37 localhost Uniform CD-ROM driver Revision: 3.20
Jul 20 13:58:37 localhost hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Jul 20 13:58:37 localhost Driver 'sd' needs updating - please use bus_type methods
Jul 20 13:58:37 localhost usbmon: debugfs is not available
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11
Jul 20 13:58:37 localhost PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 20 13:58:37 localhost ehci_hcd 0000:00:02.2: EHCI Host Controller
Jul 20 13:58:37 localhost ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
Jul 20 13:58:37 localhost ehci_hcd 0000:00:02.2: debug port 1
Jul 20 13:58:37 localhost PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jul 20 13:58:37 localhost ehci_hcd 0000:00:02.2: irq 11, io mem 0xe3004000
Jul 20 13:58:37 localhost ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 20 13:58:37 localhost usb usb1: configuration #1 chosen from 1 choice
Jul 20 13:58:37 localhost hub 1-0:1.0: USB hub found
Jul 20 13:58:37 localhost hub 1-0:1.0: 6 ports detected
Jul 20 13:58:37 localhost ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
Jul 20 13:58:37 localhost PCI: setting IRQ 7 as level-triggered
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
Jul 20 13:58:37 localhost PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.0: OHCI Host Controller
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.0: irq 7, io mem 0xe3002000
Jul 20 13:58:37 localhost usb usb2: configuration #1 chosen from 1 choice
Jul 20 13:58:37 localhost hub 2-0:1.0: USB hub found
Jul 20 13:58:37 localhost hub 2-0:1.0: 3 ports detected
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
Jul 20 13:58:37 localhost PCI: setting IRQ 5 as level-triggered
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 5 (level, low) -> IRQ 5
Jul 20 13:58:37 localhost PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.1: OHCI Host Controller
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Jul 20 13:58:37 localhost ohci_hcd 0000:00:02.1: irq 5, io mem 0xe3003000
Jul 20 13:58:37 localhost usb usb3: configuration #1 chosen from 1 choice
Jul 20 13:58:37 localhost hub 3-0:1.0: USB hub found
Jul 20 13:58:37 localhost hub 3-0:1.0: 3 ports detected
Jul 20 13:58:37 localhost usb 3-1: new full speed USB device using ohci_hcd and address 2
Jul 20 13:58:37 localhost usb 3-1: configuration #1 chosen from 1 choice
Jul 20 13:58:37 localhost usbcore: registered new interface driver usblp
Jul 20 13:58:37 localhost Initializing USB Mass Storage driver...
Jul 20 13:58:37 localhost usbcore: registered new interface driver usb-storage
Jul 20 13:58:37 localhost USB Mass Storage support registered.
Jul 20 13:58:37 localhost PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jul 20 13:58:37 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 20 13:58:37 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 20 13:58:37 localhost mice: PS/2 mouse device common for all mice
Jul 20 13:58:37 localhost input: AT Translated Set 2 keyboard as /class/input/input2
Jul 20 13:58:37 localhost usbcore: registered new interface driver usbhid
Jul 20 13:58:37 localhost drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jul 20 13:58:37 localhost oprofile: using timer interrupt.
Jul 20 13:58:37 localhost Netfilter messages via NETLINK v0.30.
Jul 20 13:58:37 localhost nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jul 20 13:58:37 localhost ip_tables: (C) 2000-2006 Netfilter Core Team
Jul 20 13:58:37 localhost TCP cubic registered
Jul 20 13:58:37 localhost NET: Registered protocol family 1
Jul 20 13:58:37 localhost NET: Registered protocol family 17
Jul 20 13:58:37 localhost RPC: Registered udp transport module.
Jul 20 13:58:37 localhost RPC: Registered tcp transport module.
Jul 20 13:58:37 localhost Using IPI Shortcut mode
Jul 20 13:58:37 localhost logips2pp: Detected unknown logitech mouse model 62
Jul 20 13:58:37 localhost input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
Jul 20 13:58:37 localhost kjournald starting.  Commit interval 5 seconds
Jul 20 13:58:37 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jul 20 13:58:37 localhost VFS: Mounted root (ext3 filesystem) readonly.
Jul 20 13:58:37 localhost Freeing unused kernel memory: 188k freed
Jul 20 13:58:37 localhost Linux video capture interface: v2.00
Jul 20 13:58:37 localhost bttv: driver version 0.9.17 loaded
Jul 20 13:58:37 localhost bttv: using 8 buffers with 2080k (520 pages) each for capture
Jul 20 13:58:37 localhost bttv: Bt8xx card found (0).
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7
Jul 20 13:58:37 localhost bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 7, latency: 32, mmio: 0xe2000000
Jul 20 13:58:37 localhost bttv0: detected: Terratec TValue (LR102) [card=33], PCI subsystem ID is 153b:1134
Jul 20 13:58:37 localhost bttv0: using: Terratec TerraTValue Version Bt878 [card=33,autodetected]
Jul 20 13:58:37 localhost bttv0: gpio: en=00000000, out=00000000 in=00ffefff [init]
Jul 20 13:58:37 localhost bttv0: tuner type=5
Jul 20 13:58:37 localhost bttv0: i2c: checking for MSP34xx @ 0x80... not found
Jul 20 13:58:37 localhost bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Jul 20 13:58:37 localhost bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Jul 20 13:58:37 localhost All bytes are equal. It is not a TEA5767
Jul 20 13:58:37 localhost tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
Jul 20 13:58:37 localhost tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Jul 20 13:58:37 localhost tuner 0-0060: type set to Philips PAL_BG (FI1
Jul 20 13:58:37 localhost tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Jul 20 13:58:37 localhost tuner 0-0060: type set to Philips PAL_BG (FI1
Jul 20 13:58:37 localhost bttv0: registered device video0
Jul 20 13:58:37 localhost bttv0: registered device vbi0
Jul 20 13:58:37 localhost bttv0: PLL: 28636363 => 35468950 .. ok
Jul 20 13:58:37 localhost nvidia: module license 'NVIDIA' taints kernel.
Jul 20 13:58:37 localhost ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5
Jul 20 13:58:37 localhost ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5
Jul 20 13:58:37 localhost NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
Jul 20 13:58:37 localhost EXT3 FS on hda2, internal journal
Jul 20 13:58:37 localhost kjournald starting.  Commit interval 5 seconds
Jul 20 13:58:37 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 20 13:58:37 localhost EXT3 FS on hdb2, internal journal
Jul 20 13:58:37 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jul 20 13:58:37 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 20 13:58:37 localhost kjournald starting.  Commit interval 5 seconds
Jul 20 13:58:37 localhost EXT3 FS on hdb3, internal journal
Jul 20 13:58:37 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jul 20 13:58:37 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 20 13:58:37 localhost kjournald starting.  Commit interval 5 seconds
Jul 20 13:58:37 localhost EXT3 FS on hdb4, internal journal
Jul 20 13:58:37 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jul 20 13:58:37 localhost Adding 1004020k swap on /dev/hdb1.  Priority:-1 extents:1 across:1004020k
Jul 20 13:58:37 localhost fbcondecor: console 1 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 1
Jul 20 13:58:37 localhost fbcondecor: console 2 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 2
Jul 20 13:58:37 localhost fbcondecor: console 3 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 3
Jul 20 13:58:37 localhost fbcondecor: console 4 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 4
Jul 20 13:58:37 localhost fbcondecor: console 5 using theme 'emergence'
Jul 20 13:58:37 localhost fbcondecor: switched decor state to 'on' on console 5
Jul 20 13:58:49 localhost agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jul 20 13:58:49 localhost agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jul 20 13:58:49 localhost agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
Jul 20 13:58:52 localhost sshd[5721]: Server listening on 0.0.0.0 port 22.
Jul 20 13:58:54 localhost cron[5872]: (CRON) STARTUP (V5.0)
Jul 20 13:59:36 localhost kdm: :0[5636]: pam_unix(kde:session): session opened for user andreas by (uid=0)
Jul 20 14:00:01 localhost cron[6152]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 20 14:00:01 localhost cron[6153]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
Jul 20 14:00:19 localhost (andreas-6202): (Version 2.20.1) wird gestartet, Prozesskennung 6202, Benutzer »andreas«
Jul 20 14:00:19 localhost (andreas-6202): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Jul 20 14:00:19 localhost (andreas-6202): Die Adresse »xml:readwrite:/home/andreas/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Jul 20 14:00:19 localhost (andreas-6202): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Jul 20 14:05:49 localhost su[6246]: Successful su for root by andreas
Jul 20 14:05:49 localhost su[6246]: + pts/1 andreas:root
Jul 20 14:05:49 localhost su[6246]: pam_unix(su:session): session opened for user root by andreas(uid=1000)