Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: GentooForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

1

27.07.2005, 00:40

Warum will meine Nvidia nicht? [gelöst]

Hi Leute ich bin am verzweifeln, seit Tagen lese, kompiliere und konfiguriere cih mein System und bekomme weder das Wheel meiner Maus ans rennen noch läuft die Grafikkarte mit 3D.

Was habe ich getan?
Mein Rechner habe ich bei einem Update auf links gezogen, gut eingene Schuld, eine Neuistallatgion musste her.
Das System läuft nun schon wieder leidlich brauchbar, aber noch nicht so wie ich es gerne hätte.

Ich bin auf der Kernelversion 2.6.12-r4 und habe an Hand diesem HowTo versucht die 3D-Funktionalität herzustellen. Ich versage auf der ganzen Linie. Hier das Log welches beim Start von X geschrieben wird:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r11 x86_64 [ELF] 
Current Operating System: Linux gentoo_1 2.6.12-gentoo-r4 #15 Tue Jul 26 16:26:49 GMT 2005 x86_64
Build Date: 20 July 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 27 00:00:30 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "ProView"
(**) |   |-->Device "Nvidia"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/,/usr/share/fonts/freefont/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib64/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3188 card 1043,80a3 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,3044 card 1043,808a rev 80 class 0c,00,10 hdr 00
(II) PCI: 00:08:0: chip 105a,3373 card 1043,80f5 rev 02 class 01,04,00 hdr 00
(II) PCI: 00:0a:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: 00:0e:0: chip 109e,036e card 11bd,001c rev 11 class 04,00,00 hdr 80
(II) PCI: 00:0e:1: chip 109e,0878 card 11bd,001c rev 11 class 04,80,00 hdr 80
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,80b0 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0342 card 1462,9480 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xf5100000 - 0xf72fffff (0x2200000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xe4c00000 - 0xf4bfffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:0), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:1), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:2), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
(--) PCI: (0:14:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xf4d00000/12
(--) PCI:*(1:0:0) nVidia Corporation GeForce FX 5700 rev 161, Mem @ 0xf6000000/24, 0xe8000000/27, BIOS @ 0xf7200000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[1] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[2] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[3] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[4] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[5] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[6] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[7] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[8] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[9] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[10] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[11] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[12] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[13] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[14] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[15] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[16] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[17] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[18] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[19] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[22] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[23] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[24] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[26] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[27] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[1] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[2] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[3] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[4] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[5] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[6] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[7] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[8] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[9] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[10] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[11] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[12] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[13] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[14] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[15] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[16] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[17] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[18] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[19] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[22] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[23] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[24] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[26] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[27] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[6] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[7] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[8] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[9] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[10] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[13] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[14] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[15] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[19] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[20] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[21] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[22] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[23] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[24] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[25] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[26] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[27] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[28] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[29] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[30] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[31] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[32] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[33] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[34] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib64/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib64/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.6629
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nv"
(II) Loading /usr/lib64/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
	GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
	GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
	0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
	0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
	Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
	GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
	GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
	GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
	Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
	GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
	GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
	GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
	GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
	GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
	Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
	GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
	Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
	0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
	0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
	GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
	0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
	0x0211, 0x021D, 0x021E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce FX 5700 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[6] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[7] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[8] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[9] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[10] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[13] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[14] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[15] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[19] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[20] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[21] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[22] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[23] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[24] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[25] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[26] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[27] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[28] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[29] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[30] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[31] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[32] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[33] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[34] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[6] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[7] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[8] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[9] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[10] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[13] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[14] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[15] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[22] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[23] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[24] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[25] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[26] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[27] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[28] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[29] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[30] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[31] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[32] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[33] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[34] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[35] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[36] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[37] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
	[38] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[39] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce FX 5700"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE8000000
(--) NV(0): MMIO registers at 0xF6000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib64/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib64/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...found one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: PTS  Model: 3e6  Serial#: 30
(II) NV(0): Year: 1998  Week: 52
(II) NV(0): EDID Version: 1.0
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 37  vert.: 27
(II) NV(0): Gamma: 2.76
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.618 redY: 0.349   greenX: 0.280 greenY: 0.605
(II) NV(0): blueX: 0.152 blueY: 0.063   whiteX: 0.281 whiteY: 0.310
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) NV(0): #1: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) NV(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) NV(0): #4: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) NV(0): #5: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) NV(0): #6: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) NV(0): #7: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 162.0 MHz   Image Size:  370 x 270 mm
(II) NV(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) NV(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz   Image Size:  370 x 270 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 65.0 MHz   Image Size:  370 x 270 mm
(II) NV(0): h_active: 1024  h_sync: 1048  h_sync_end 1084 h_blank_end 1344 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 202.5 MHz   Image Size:  370 x 270 mm
(II) NV(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) NV(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) NV(0): config file hsync range 30-98kHz not within DDC hsync ranges.
(WW) NV(0): config file vrefresh range 50-150Hz not within DDC vrefresh ranges.
(II) NV(0): ProView: Using hsync range of 30.00-98.00 kHz
(II) NV(0): ProView: Using vrefresh range of 50.00-150.00 Hz
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(--) NV(0): Virtual size is 1600x1200 (pitch 1600)
(**) NV(0): *Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz
(II) NV(0): Modeline "1600x1200"  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) NV(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) NV(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync
(**) NV(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) NV(0):  Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
(II) NV(0): Modeline "1600x1200"  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) NV(0):  Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
(II) NV(0): Modeline "1600x1200"  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) NV(0):  Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) NV(0):  Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) NV(0): Modeline "1400x1050"  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync
(**) NV(0):  Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) NV(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(**) NV(0):  Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) NV(0):  Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) NV(0):  Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) NV(0): Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
(**) NV(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) NV(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) NV(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "1024x768"  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "960x720"  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync
(**) NV(0):  Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "928x696"  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync
(**) NV(0):  Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "896x672"  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "800x600"  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "800x600"   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) NV(0): Modeline "800x600"   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "800x600"   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) NV(0): Modeline "700x525"   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "640x512"   78.75  640 672 752 864  512 512 514 536 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x512"   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) NV(0): Modeline "640x480"   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) NV(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (370, 270) mm
(--) NV(0): DPI set to (109, 112)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib64/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe8000000 - 0xefffffff (0x8000000) MX[B]
	[1] 0	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xf7f00000 - 0xf7f000ff (0x100) MX[B]
	[8] -1	0	0xf4e00000 - 0xf4e00fff (0x1000) MX[B]
	[9] -1	0	0xf7d00000 - 0xf7d03fff (0x4000) MX[B]
	[10] -1	0	0xf7a00000 - 0xf7a1ffff (0x20000) MX[B]
	[11] -1	0	0xf7b00000 - 0xf7b00fff (0x1000) MX[B]
	[12] -1	0	0xf7900000 - 0xf79007ff (0x800) MX[B]
	[13] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[14] -1	0	0xf7200000 - 0xf721ffff (0x20000) MX[B](B)
	[15] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[16] -1	0	0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
	[17] -1	0	0xf4d00000 - 0xf4d00fff (0x1000) MX[B](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[24] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[25] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[26] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[27] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[28] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[29] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[30] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[31] -1	0	0x0000d800 - 0x0000d803 (0x4) IX[B]
	[32] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[33] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[34] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[35] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[36] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[37] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[38] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[39] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B]
	[40] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[41] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xe8000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1 
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "logicdp"
(**) Keyboard1: XkbModel: "logicdp"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "XkbVariant" "de"
(**) Keyboard1: XkbVariant: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
SetClientVersion: 0 8


Wie man hier sehen kann, werden die Module auch geladen.

Quellcode

1
2
3
Jul 27 00:00:24 gentoo_1 nvidia: module license 'NVIDIA' taints kernel.
Jul 27 00:00:24 gentoo_1 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 27 00:00:24 gentoo_1 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-6629  Wed Nov  3 11:43:48 PST 2004


Mache ich ein glxinfo, erhalte ich ein Segmentation fault. Dies hier steht in /var/log/messages

Quellcode

1
Jul 27 00:38:08 gentoo_1 glxinfo[7230]: segfault at 00002aaaaadaed26 rip 00002aaaac18465e rsp 00007ffffffb7dd8 error 6



Wer kann mir aufs Pferd helfen?
Mit freundlichem Gruß

2ktrouble
______________________________
was du hier liest ist die signatur

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »2ktrouble« (01.08.2005, 02:25)


2

27.07.2005, 01:31

Postest du mal bitte deine xorg.conf ?

Also gehen wir erstmal die Warnings durch :

Zitat

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)


da hat wohl wer was vergessen in den KErnel zu Kompilieren *zwincker* ;)

Zitat

(WW) NV(0): config file hsync range 30-98kHz not within DDC hsync ranges.
(WW) NV(0): config file vrefresh range 50-150Hz not within DDC vrefresh ranges.


Diese 2 Werte solltest du auf Jedenfall nochmal überprüfen ob die Richtig sind, denn anscheinend sind sie das ja nicht ;) und da liegt denke ich auch die Ursache.

Zitat

(EE) Failed to initialize GLX extension (NVIDIA X driver not found)


Da haben wirs dochschon... GLX wurde nicht geladen. und darum kriegst du den Error.

Ich hatte auch so meinen Stress mit GLX, habe dazu meine xorg.conf angepasst ( darum brauche ich die weil ich dir die dann abändern würde :) )

und habe nvidia-glx und nvidia-kernel DEINSTALLIERT und DANN Neu emerged... also nicht rememergen sondern erstmal komplett von der Platte Putzen ansonsten kommt der Error wieder ( war beimir so )


Der Segmentation fault sagt mir nix aber google Spcutk dazu viel aus :

Google Results les dich da mal durch
Es gibt bloss eins, was wichtig ist: dass man sterben muss.

Suicide is man's way of telling God, "You can't fire me - I quit."

no one gets out here alive....

3

27.07.2005, 09:46

Also ich habe ganz einfach mittels emerge nvidia-kernel die Nvidia Kernel Sources gezigen. Danach von der offiziellen Nvidia Treiber-Download Seite den neuesten Linux-Treiber gezogen und installiert. Klappte bis jetzt auf allen Gentoo Installationen ohne ein Problem.

Ja und die Monitor Werte, die stehen ja entweder im Handbuch, auf der Rückseite des Monis selbst oder man findet sie im Internet. Das dürfte auch kein Thema sein notfalls mit diesen Werten einfach ein wenig zu spielen. Man weiß ja wieviel Hertz der Moni mitmachte ohne Gentoo. Und so kann man sich eigentluch ganz gut rantasten.

Ja und bei Maus und Tastatur habe ich bis jetzt immer /dev/psaux für meine PS/2 Maus benutzt und die 105 Tasten Variante für die Tastatur.

Somit hatte ich noch nie ein Problem mit X. Egal auf welchem Kernel oder welche konfiguration das System fuhr.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »MichaelM« (27.07.2005, 09:51)


4

27.07.2005, 10:13

die xorg.conf

Hi Rafer,

hier ersteinmal die xorg.conf:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"logicdp"
    Option "XkbLayout"	"de"
    Option "XkbVariant"	"de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    
# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "ProView"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30-98

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-150

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "Nvidia"
    Driver      "nv"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "Nvidia"
    Monitor     "ProView"
    DefaultDepth 24

    Subsection "Display"
# 	Depth       8
#       Modes       "1280x1024" "1024x768" "800x600" "640x480"
#       ViewPort    0 0
#    EndSubsection
#   Subsection "Display"
#        Depth       16
#        Modes       "1280x1024" "1024x768" "800x600" "640x480"
#        ViewPort    0 0
#    EndSubsection
#    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1280x1024" "1152x864"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection


Ich hab schon wegen APM gesucht, aber nicht gefunden unter: ?(

Quellcode

1
2
3
4
5
                 [*] Power Management support
                 [ ]   Power Management Debug Support 
                 [ ]   Software Suspend (EXPERIMENTAL)
                     ACPI (Advanced Configuration and Power Interface) Support  --->
                     CPU Frequency scaling  --->


Zu den sync-ranges die habe ich meiner Monitor beschreibung entnommen, klar man kann natürlich auch aus den vorgegebenen wählen. Kann ich ja mal ausprobieren.

Danke für den Lesestoff zum segmentation fault, werde ich mir zu Gemüte führen.
Mit freundlichem Gruß

2ktrouble
______________________________
was du hier liest ist die signatur

amielke

unregistriert

5

27.07.2005, 10:35

Du solltest nv vielleicht durch nvidia ersetzen, sonnst kann es nicht gehen.

Zitat

Section "Device"
Identifier "Nvidia"
Driver "nv"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection


Gruß Andreas

6

28.07.2005, 13:17

Also das mit dem Treiber (nvidia statt nv, nv ist der nicht 3d beschleunigte open source treiber der aber zum testen eigentlich reichen sollte) steht ja schon oben. Ausserdem definierst du eine 2. Grafikkarte mit standard VGA Treiber. Diese wird zwar in der "screen" nicht geladen, führt aber evtl. doch zu Problemen. Zu guter letzt ist deine xorg.conf ziemlich schlecht lesbar, fang am besten nochmal mit ner leeren Datei an und schreib nur rein was du wirklich brauchst, unter den 100 auskommentierten Zeilen wirst du kleine Fehler eher später finden.

Zur Maus:
Maus mit 5 Tasten + Rad [gelöst]
Für eine 7 Tasten Maus folgendes in die xorg.conf:
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ZAxisMapping" "6 7

und wenn die Funktion des Rades auf den Daumentasten liegt das in die konsole:
xmodmap -e "pointer = 1 2 3 6 7 4 5""

7

28.07.2005, 15:09

@K3ssl

Die Config von ihm ist eine Halbautomatisch Erstelle von xorg soweit ich das sehen kann, darum ist da soviel Kommentiertes Zeug drin.
Es gibt bloss eins, was wichtig ist: dass man sterben muss.

Suicide is man's way of telling God, "You can't fire me - I quit."

no one gets out here alive....

8

28.07.2005, 17:51

Also bei der xorg.conf kann dein Scrollrad garnicht funktionieren..

Der normale PS/2-Treiber unterstützt überhaupt kein ZAxisMapping...

Tausch einfach mal den Wert Protocol in der Mouse-Section gegen "explorerps/2". Dann müsste dein Scrollrad funktionieren.

Den Auto-Wert finde ich Persönlich nicht besonders gut, weil dabei auch Probleme auftreten können.

J. W. von Göthe
Faust
- Der Tragödie erster Teil -

V. 1337 - Faust: "Was ist mit diesem Rätselwort gemeint?"

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »neweb« (28.07.2005, 17:52)


9

28.07.2005, 19:15

Schreib das als Maus Device dann klappt dein Scrollrad :

Quellcode

1
2
3
4
5
6
7
8
9
10
Section "InputDevice"

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "ImPS/2"
    Option "Device"      "/dev/input/mice"
    Option "ZAxisMapping"       "4 5"
    Option "ChordMiddle"

EndSection
Es gibt bloss eins, was wichtig ist: dass man sterben muss.

Suicide is man's way of telling God, "You can't fire me - I quit."

no one gets out here alive....

10

28.07.2005, 19:32

Zitat

Original von Rafer
Schreib das als Maus Device dann klappt dein Scrollrad :

Quellcode

1
2
3
4
5
6
7
8
9
10
Section "InputDevice"

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "ImPS/2"
    Option "Device"      "/dev/input/mice"
    Option "ZAxisMapping"       "4 5"
    Option "ChordMiddle"

EndSection

Oder:

Quellcode

1
2
3
4
5
6
7
8
9
10
Section "InputDevice"

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "explorerps/2"
    Option "Device"      "/dev/input/mice"
    Option "ZAxisMapping"       "4 5"
    Option "ChordMiddle"

EndSection


*klugscheiss* :P

J. W. von Göthe
Faust
- Der Tragödie erster Teil -

V. 1337 - Faust: "Was ist mit diesem Rätselwort gemeint?"

11

01.08.2005, 02:24

Heute erst wieder online gegangen, danke für die Antworten. 3D läuft wieder und das mit der Maus ist auch wieder im Fluß.

Ja die xorg.conf war automatisch konfiguriert, werde nun dran gehen und sie entmisten.
Mit freundlichem Gruß

2ktrouble
______________________________
was du hier liest ist die signatur