GentooForum.de

Quellcode

# IPv4 and IPv6 localhost aliases
127.0.0.1   localhost
::1         localhost

Quellcode

# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

<IfDefine DEFAULT_VHOST>
# see bug #178966 why this is in here

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

# Use name-based virtual hosting.
NameVirtualHost *:80

# When virtual hosts are enabled, the main host defined in the default
# httpd.conf configuration will go away. We redefine it here so that it is
# still available.
#
# If you disable this vhost by removing -D DEFAULT_VHOST from
# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
# the default.
<VirtualHost *:80>
ServerName mustername.dyndns.org
Include /etc/apache2/vhosts.d/default_vhost.include

<IfModule mpm_peruser_module>
ServerEnvironment apache apache
</IfModule>
</VirtualHost>
</IfDefine>

# vim: ts=4 filetype=apache

Quellcode

 * Starting apache2 ...
apache2: apr_sockaddr_info_get() failed for workstation
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName                                        [ ok ]
workstation home #

Quellcode

workstation home # ifconfig
eth0  	Link encap:Ethernet  HWaddr 70:f3:95:00:44:3e  
      	inet addr:192.168.2.101  Bcast:192.168.2.255  Mask:255.255.255.0
      	inet6 addr: fe80::72f3:95ff:fe00:443e/64 Scope:Link
      	UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      	RX packets:11716 errors:0 dropped:0 overruns:0 frame:0
      	TX packets:8975 errors:0 dropped:0 overruns:0 carrier:0
      	collisions:0 txqueuelen:1000 
      	RX bytes:12246080 (11.6 MiB)  TX bytes:1167971 (1.1 MiB)
      	Interrupt:16 

lo    	Link encap:Local Loopback  
      	inet addr:127.0.0.1  Mask:255.0.0.0
      	inet6 addr: ::1/128 Scope:Host
      	UP LOOPBACK RUNNING  MTU:16436  Metric:1
      	RX packets:70 errors:0 dropped:0 overruns:0 frame:0
      	TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
      	collisions:0 txqueuelen:0 
      	RX bytes:5248 (5.1 KiB)  TX bytes:5248 (5.1 KiB)

workstation home # 

Auf dieser Maschine läuft ja auch mein Webserver

Quellcode

workstation home # telnet mustername.dyndns.org 80
telnet: could not resolve mustername.dyndns.org/80: Name or service not known
workstation home #

Quellcode

workstation home # ping -c3 mustername.dyndns.org
ping: unknown host mustername.dyndns.org

Quellcode

workstation home # cat /etc/hosts
# /etc/hosts: Local Host Database
#
# This file describes a number of aliases-to-address mappings for the for 
# local hosts that share this file.
#
# In the presence of the domain name service or NIS, this file may not be 
# consulted at all; see /etc/host.conf for the resolution order.
#

# IPv4 and IPv6 localhost aliases
127.0.0.1	localhost
::1		localhost
192.168.2.101	workstations.hades workstatio

Quellcode

workstation home # cat /etc/conf.d/apache2 
# /etc/conf.d/apache2: config file for /etc/init.d/apache2

# When you install a module it is easy to activate or deactivate the modules
# and other features of apache using the APACHE2_OPTS line. Every module should
# install a configuration in /etc/apache2/modules.d. In that file will have an
# <IfDefine NNN> directive where NNN is the option to enable that module.
#
# Here are the options available in the default configuration:
#
#  AUTH_DIGEST  Enables mod_auth_digest
#  AUTHNZ_LDAP  Enables authentication through mod_ldap (available if USE=ldap)
#  CACHE    	Enables mod_cache
#  DAV      	Enables mod_dav
#  ERRORDOCS	Enables default error documents for many languages.
#  INFO     	Enables mod_info, a useful module for debugging
#  LANGUAGE 	Enables content-negotiation based on language and charset.
#  LDAP     	Enables mod_ldap (available if USE=ldap)
#  MANUAL   	Enables /manual/ to be the apache manual (available if USE=docs)
#  MEM_CACHE	Enables default configuration mod_mem_cache
#  PROXY    	Enables mod_proxy
#  SSL      	Enables SSL (available if USE=ssl)
#  SUEXEC   	Enables running CGI scripts (in USERDIR) through suexec.
#  USERDIR  	Enables /~username mapping to /home/username/public_html
#
#
# The following two options provide the default virtual host for the HTTP and
# HTTPS protocol. YOU NEED TO ENABLE AT LEAST ONE OF THEM, otherwise apache
# will not listen for incomming connections on the approriate port.
#
#  DEFAULT_VHOST  	Enables name-based virtual hosts, with the default
#                 	virtual host being in /var/www/localhost/htdocs
#  SSL_DEFAULT_VHOST  Enables default vhost for SSL (you should enable this
#                 	when you enable SSL)
#
APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE -D PHP5"

# Extended options for advanced uses of Apache ONLY
# You don't need to edit these unless you are doing crazy Apache stuff
# As not having them set correctly, or feeding in an incorrect configuration
# via them will result in Apache failing to start
# YOU HAVE BEEN WARNED.

# PID file
#PIDFILE=/var/run/apache2.pid

# timeout for startup/shutdown checks
#TIMEOUT=10

# ServerRoot setting
#SERVERROOT=/usr/lib64/apache2

# Configuration file location
# - If this does NOT start with a '/', then it is treated relative to
# $SERVERROOT by Apache
#CONFIGFILE=/etc/apache2/httpd.conf

# Location to log startup errors to
# They are normally dumped to your terminal.
#STARTUPERRORLOG="/var/log/apache2/startuperror.log"

# A command that outputs a formatted text version of the HTML at the URL
# of the command line. Designed for lynx, however other programs may work.
#LYNX="lynx -dump"

# The URL to your server's mod_status status page.
# Required for status and fullstatus
#STATUSURL="http://localhost/server-status"

# Method to use when reloading the server
# Valid options are 'restart' and 'graceful'
# See http://httpd.apache.org/docs/2.2/stopping.html for information on
# what they do and how they differ.
#RELOAD_TYPE="graceful"

Quellcode

workstation nicolas # cat /etc/apache2/vhosts.d/00_default_vhost.conf 
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

<IfDefine DEFAULT_VHOST>
# see bug #178966 why this is in here

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

# Use name-based virtual hosting.
NameVirtualHost *:80

# When virtual hosts are enabled, the main host defined in the default
# httpd.conf configuration will go away. We redefine it here so that it is
# still available.
#
# If you disable this vhost by removing -D DEFAULT_VHOST from
# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
# the default.
<VirtualHost *:80>
	ServerName mustername.dyndns.org
	Include /etc/apache2/vhosts.d/default_vhost.include

	<IfModule mpm_peruser_module>
		ServerEnvironment apache apache
	</IfModule>
</VirtualHost>
</IfDefine>

# vim: ts=4 filetype=apache

Quellcode

workstation home # dig mustername.dyndns.org

; <<>> DiG 9.7.1 <<>> mustername.dyndns.org
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 46694
;; flags: qr; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;mustername.dyndns.org.		IN	A

;; Query time: 41 msec
;; SERVER: 192.168.1.1#53(192.168.1.1)
;; WHEN: Sat Dec 11 10:02:05 2010
;; MSG SIZE  rcvd: 37

workstation home #