[erledigt] 3ware Raid0 /dev/sda fehlt nach Neuinstallation

flammenflitzer

Meister

Beiträge: 1 275

04.08.2012, 11:36

3ware Raid0 /dev/sda fehlt nach Neuinstallation

Systemstart funktioniert:
cat /boot/grub/grub.conf

	Quellcode
1 2 3	title Gentoo Linux root=/dev/sda5 root (hd0,4) kernel /boot/bzImage root=/dev/sda5

Allerdings fehlt danach /dev/sda5
Die SATA Geräte sind da.

	Quellcode
1 2 3 4	olaf@flammenflitzer ~ $ ls /dev/sd* /dev/sdb /dev/sdc1 /dev/sde /dev/sdf1 /dev/sdg2 /dev/sdb1 /dev/sdd /dev/sde1 /dev/sdg /dev/sdg3 /dev/sdc /dev/sdd1 /dev/sdf /dev/sdg1 /dev/sdg5

Quellcode

dmesg | grep 3ware 
3ware Storage Controller device driver for Linux v1.26.02.003.
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x7c00, IRQ: 16.
scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0

Quellcode

dmesg | grep SCSI
SCSI subsystem initialized
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 5:0:0:0: [sde] Attached SCSI disk
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 6:0:0:0: [sdf] Attached SCSI disk
sd 7:0:0:0: [sdg] Attached SCSI disk

	Quellcode
1 2	uname -r 3.4.0-gentoo

lspci .....

Quellcode

1
2
3

04:01.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
06:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
07:00.0 Mass storage controller: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA Controller (rev 01)

Quellcode

flammenflitzer olaf # cat /usr/src/linux/.config | grep SCSI
# CONFIG_CISS_SCSI_TAPE is not set
# SCSI device support
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
# SCSI Transports
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_TCM_PSCSI is not set
# CONFIG_ISCSI_TARGET is not set
CONFIG_I2O_SCSI=m
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
# CONFIG_ISCSI_IBFT_FIND is not set
flammenflitzer olaf #

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »flammenflitzer« (14.08.2012, 20:41)