Sie sind nicht angemeldet.

1

14.03.2006, 09:30

[gelöst] kernel-Meldungen

Ich habe vor einigen Tagen ein "emerge --update --ask world" gemacht und danach ein
"revdep rebuild"
seit diesem Vorgang habe ich beim Booten und beim herunterfahren eine Meldung im Kernel!

"Re-caching dependencies info(mtimes differ)...."

diese Meldung kommt beim booten 5mal!

Was bedeutet dies?

Andreas
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »andreasullrich« (14.03.2006, 20:05)


2

14.03.2006, 10:54

wann kommt denne diese meldung beim booten? also bei welchem dienst? und wieso machst du nach einemupdate ein revdep rebuild?

mfg

Apollo

PS: vielleicht mal die komplette bootmeldung posten :)
In jedem noch so reinen Herzen existiert ein Ort des tiefsten Abgrundes. (C) Apollo '02

3

14.03.2006, 13:03

revdep rebuild habe ich gemacht, weil einige programme nicht mehr funktionierten.
Unter anderem xorg und xine, insgesamt 15 programme.

wo kann ich die bootmeldungen ersehen(welche datei)

Andreas
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

4

14.03.2006, 15:03

eigentlich unter /var/log, aber versuch mla ein

Quellcode

1
emerge depclean
und dann ein

Quellcode

1
revdep rebuild

vielleicht hilft das schon mal.

Gruß DerMoench
Ein Leben wie auf Messers Schneide!!


5

14.03.2006, 15:30

hier meine Bootmeldung!

Mar 14 09:26:18 localhost syslog-ng[6242]: syslog-ng version 1.6.9 starting
Mar 14 09:26:18 localhost syslog-ng[6242]: Changing permissions on special file /dev/tty12
Mar 14 09:26:18 localhost Linux version 2.6.15-gentoo-r1 (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #10 SMP PREEMPT Fri Feb 24 17:34:28 CET 2006
Mar 14 09:26:18 localhost BIOS-provided physical RAM map:
Mar 14 09:26:18 localhost BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 14 09:26:18 localhost BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 14 09:26:18 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 14 09:26:18 localhost BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Mar 14 09:26:18 localhost BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Mar 14 09:26:18 localhost BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Mar 14 09:26:18 localhost BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 14 09:26:18 localhost BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 14 09:26:18 localhost BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 14 09:26:18 localhost Warning only 896MB will be used.
Mar 14 09:26:18 localhost Use a HIGHMEM enabled kernel.
Mar 14 09:26:18 localhost 896MB LOWMEM available.
Mar 14 09:26:18 localhost On node 0 totalpages: 229376
Mar 14 09:26:18 localhost DMA zone: 4096 pages, LIFO batch:0
Mar 14 09:26:18 localhost DMA32 zone: 0 pages, LIFO batch:0
Mar 14 09:26:18 localhost Normal zone: 225280 pages, LIFO batch:31
Mar 14 09:26:18 localhost HighMem zone: 0 pages, LIFO batch:0
Mar 14 09:26:18 localhost DMI 2.2 present.
Mar 14 09:26:18 localhost ACPI: RSDP (v000 Nvidia ) @ 0x000f75c0
Mar 14 09:26:18 localhost ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
Mar 14 09:26:18 localhost ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
Mar 14 09:26:18 localhost ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
Mar 14 09:26:18 localhost ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Mar 14 09:26:18 localhost ACPI: Local APIC address 0xfee00000
Mar 14 09:26:18 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 14 09:26:18 localhost Processor #0 6:10 APIC version 16
Mar 14 09:26:18 localhost ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 14 09:26:18 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 14 09:26:18 localhost IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Mar 14 09:26:18 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 14 09:26:18 localhost ACPI: BIOS IRQ0 pin2 override ignored.
Mar 14 09:26:18 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 14 09:26:18 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Mar 14 09:26:18 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Mar 14 09:26:18 localhost ACPI: IRQ9 used by override.
Mar 14 09:26:18 localhost ACPI: IRQ14 used by override.
Mar 14 09:26:18 localhost ACPI: IRQ15 used by override.
Mar 14 09:26:18 localhost Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 14 09:26:18 localhost Using ACPI (MADT) for SMP configuration information
Mar 14 09:26:18 localhost Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Mar 14 09:26:18 localhost Built 1 zonelists
Mar 14 09:26:18 localhost Kernel command line: root=/dev/hda2
Mar 14 09:26:18 localhost mapped APIC to ffffd000 (fee00000)
Mar 14 09:26:18 localhost mapped IOAPIC to ffffc000 (fec00000)
Mar 14 09:26:18 localhost Initializing CPU#0
Mar 14 09:26:18 localhost PID hash table entries: 4096 (order: 12, 65536 bytes)
Mar 14 09:26:18 localhost Detected 1830.292 MHz processor.
Mar 14 09:26:18 localhost Using tsc for high-res timesource
Mar 14 09:26:18 localhost Console: colour VGA+ 80x25
Mar 14 09:26:18 localhost Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 14 09:26:18 localhost Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 14 09:26:18 localhost Memory: 904080k/917504k available (2503k kernel code, 13000k reserved, 883k data, 196k init, 0k highmem)
Mar 14 09:26:18 localhost Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 14 09:26:18 localhost Calibrating delay using timer specific routine.. 3665.40 BogoMIPS (lpj=7330803)
Mar 14 09:26:18 localhost Mount-cache hash table entries: 512
Mar 14 09:26:18 localhost CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar 14 09:26:18 localhost CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar 14 09:26:18 localhost CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar 14 09:26:18 localhost CPU: L2 Cache: 512K (64 bytes/line)
Mar 14 09:26:18 localhost CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Mar 14 09:26:18 localhost Intel machine check architecture supported.
Mar 14 09:26:18 localhost Intel machine check reporting enabled on CPU#0.
Mar 14 09:26:18 localhost mtrr: v2.0 (20020519)
Mar 14 09:26:18 localhost Enabling fast FPU save and restore... done.
Mar 14 09:26:18 localhost Enabling unmasked SIMD FPU exception support... done.
Mar 14 09:26:18 localhost Checking 'hlt' instruction... OK.
Mar 14 09:26:18 localhost CPU0: AMD Athlon(tm) XP 2500+ stepping 00
Mar 14 09:26:18 localhost Total of 1 processors activated (3665.40 BogoMIPS).
Mar 14 09:26:18 localhost ENABLING IO-APIC IRQs
Mar 14 09:26:18 localhost ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Mar 14 09:26:18 localhost Brought up 1 CPUs
Mar 14 09:26:18 localhost NET: Registered protocol family 16
Mar 14 09:26:18 localhost ACPI: bus type pci registered
Mar 14 09:26:18 localhost PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
Mar 14 09:26:18 localhost PCI: Using configuration type 1
Mar 14 09:26:18 localhost ACPI: Subsystem revision 20050902
Mar 14 09:26:18 localhost ACPI: Interpreter enabled
Mar 14 09:26:18 localhost ACPI: Using IOAPIC for interrupt routing
Mar 14 09:26:18 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 14 09:26:18 localhost PCI: Probing PCI hardware (bus 00)
Mar 14 09:26:18 localhost PCI: nForce2 C1 Halt Disconnect fixup
Mar 14 09:26:18 localhost Boot video device is 0000:02:00.0
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Mar 14 09:26:18 localhost Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 14 09:26:18 localhost pnp: PnP ACPI init
Mar 14 09:26:18 localhost pnp: PnP ACPI: found 16 devices
Mar 14 09:26:18 localhost SCSI subsystem initialized
Mar 14 09:26:18 localhost usbcore: registered new driver usbfs
Mar 14 09:26:18 localhost usbcore: registered new driver hub
Mar 14 09:26:18 localhost PCI: Using ACPI for IRQ routing
Mar 14 09:26:18 localhost PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4200-0x427f has been reserved
Mar 14 09:26:18 localhost pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
Mar 14 09:26:18 localhost pnp: 00:01: ioport range 0x5000-0x503f has been reserved
Mar 14 09:26:18 localhost pnp: 00:01: ioport range 0x5500-0x553f has been reserved
Mar 14 09:26:18 localhost PCI: Bridge: 0000:00:08.0
Mar 14 09:26:18 localhost IO window: disabled.
Mar 14 09:26:18 localhost MEM window: disabled.
Mar 14 09:26:18 localhost PREFETCH window: de000000-deffffff
Mar 14 09:26:18 localhost PCI: Bridge: 0000:00:1e.0
Mar 14 09:26:18 localhost IO window: disabled.
Mar 14 09:26:18 localhost MEM window: dc000000-ddffffff
Mar 14 09:26:18 localhost PREFETCH window: d0000000-d7ffffff
Mar 14 09:26:18 localhost PCI: Setting latency timer of device 0000:00:08.0 to 64
Mar 14 09:26:18 localhost Machine check exception polling timer started.
Mar 14 09:26:18 localhost audit: initializing netlink socket (disabled)
Mar 14 09:26:18 localhost audit(1142328356.712:1): initialized
Mar 14 09:26:18 localhost Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 14 09:26:18 localhost NTFS driver 2.1.25 [Flags: R/O].
Mar 14 09:26:18 localhost io scheduler noop registered
Mar 14 09:26:18 localhost io scheduler anticipatory registered
Mar 14 09:26:18 localhost io scheduler deadline registered
Mar 14 09:26:18 localhost io scheduler cfq registered
Mar 14 09:26:18 localhost ACPI: Power Button (FF) [PWRF]
Mar 14 09:26:18 localhost ACPI: Power Button (CM) [PWRB]
Mar 14 09:26:18 localhost lp: driver loaded but no devices found
Mar 14 09:26:18 localhost Linux agpgart interface v0.101 (c) Dave Jones
Mar 14 09:26:18 localhost agpgart: Detected NVIDIA nForce2 chipset
Mar 14 09:26:18 localhost agpgart: AGP aperture is 64M @ 0xd8000000
Mar 14 09:26:18 localhost [drm] Initialized drm 1.0.0 20040925
Mar 14 09:26:18 localhost PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 14 09:26:18 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 14 09:26:18 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 14 09:26:18 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar 14 09:26:18 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 14 09:26:18 localhost serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 14 09:26:18 localhost 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 14 09:26:18 localhost 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 14 09:26:18 localhost parport: PnPBIOS parport detected.
Mar 14 09:26:18 localhost parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Mar 14 09:26:18 localhost lp0: using parport0 (interrupt-driven).
Mar 14 09:26:18 localhost mice: PS/2 mouse device common for all mice
Mar 14 09:26:18 localhost Floppy drive(s): fd0 is 1.44M
Mar 14 09:26:18 localhost FDC 0 is a post-1991 82077
Mar 14 09:26:18 localhost PPP generic driver version 2.4.2
Mar 14 09:26:18 localhost NET: Registered protocol family 24
Mar 14 09:26:18 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 14 09:26:18 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 14 09:26:18 localhost NFORCE2: IDE controller at PCI slot 0000:00:09.0
Mar 14 09:26:18 localhost NFORCE2: chipset revision 162
Mar 14 09:26:18 localhost NFORCE2: not 100% native mode: will probe irqs later
Mar 14 09:26:18 localhost NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Mar 14 09:26:18 localhost NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Mar 14 09:26:18 localhost NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Mar 14 09:26:18 localhost ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Mar 14 09:26:18 localhost ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Mar 14 09:26:18 localhost Probing IDE interface ide0...
Mar 14 09:26:18 localhost input: AT Translated Set 2 keyboard as /class/input/input0
Mar 14 09:26:18 localhost logips2pp: Detected unknown logitech mouse model 62
Mar 14 09:26:18 localhost input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
Mar 14 09:26:18 localhost hda: FUJITSU MPF3204AT, ATA DISK drive
Mar 14 09:26:18 localhost hdb: Maxtor 6L250R0, ATA DISK drive
Mar 14 09:26:18 localhost ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 14 09:26:18 localhost Probing IDE interface ide1...
Mar 14 09:26:18 localhost hdc: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
Mar 14 09:26:18 localhost ide1 at 0x170-0x177,0x376 on irq 15
Mar 14 09:26:18 localhost hda: max request size: 128KiB
Mar 14 09:26:18 localhost hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
Mar 14 09:26:18 localhost hda: cache flushes not supported
Mar 14 09:26:18 localhost hda: hda1 hda2
Mar 14 09:26:18 localhost hdb: max request size: 1024KiB
Mar 14 09:26:18 localhost hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
Mar 14 09:26:18 localhost hdb: cache flushes supported
Mar 14 09:26:18 localhost hdb: hdb1 hdb2 hdb3
Mar 14 09:26:18 localhost hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Mar 14 09:26:18 localhost Uniform CD-ROM driver Revision: 3.20
Mar 14 09:26:18 localhost libata version 1.20 loaded.
Mar 14 09:26:18 localhost usbmon: debugfs is not available
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Mar 14 09:26:18 localhost ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
Mar 14 09:26:18 localhost PCI: Setting latency timer of device 0000:00:02.2 to 64
Mar 14 09:26:18 localhost ehci_hcd 0000:00:02.2: EHCI Host Controller
Mar 14 09:26:18 localhost ehci_hcd 0000:00:02.2: debug port 1
Mar 14 09:26:18 localhost PCI: cache line size of 64 is not supported by device 0000:00:02.2
Mar 14 09:26:18 localhost ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
Mar 14 09:26:18 localhost ehci_hcd 0000:00:02.2: irq 16, io mem 0xdf003000
Mar 14 09:26:18 localhost ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 14 09:26:18 localhost hub 1-0:1.0: USB hub found
Mar 14 09:26:18 localhost hub 1-0:1.0: 6 ports detected
Mar 14 09:26:18 localhost ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
Mar 14 09:26:18 localhost ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
Mar 14 09:26:18 localhost PCI: Setting latency timer of device 0000:00:02.0 to 64
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.0: OHCI Host Controller
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.0: irq 17, io mem 0xdf001000
Mar 14 09:26:18 localhost hub 2-0:1.0: USB hub found
Mar 14 09:26:18 localhost hub 2-0:1.0: 3 ports detected
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
Mar 14 09:26:18 localhost ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
Mar 14 09:26:18 localhost PCI: Setting latency timer of device 0000:00:02.1 to 64
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.1: OHCI Host Controller
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
Mar 14 09:26:18 localhost ohci_hcd 0000:00:02.1: irq 18, io mem 0xdf002000
Mar 14 09:26:18 localhost hub 3-0:1.0: USB hub found
Mar 14 09:26:18 localhost hub 3-0:1.0: 3 ports detected
Mar 14 09:26:18 localhost usb 1-1: new high speed USB device using ehci_hcd and address 2
Mar 14 09:26:18 localhost usbcore: registered new driver usblp
Mar 14 09:26:18 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Mar 14 09:26:18 localhost Initializing USB Mass Storage driver...
Mar 14 09:26:18 localhost usb 2-2: new low speed USB device using ohci_hcd and address 2
Mar 14 09:26:18 localhost usbcore: registered new driver usb-storage
Mar 14 09:26:18 localhost USB Mass Storage support registered.
Mar 14 09:26:18 localhost usb 3-1: new full speed USB device using ohci_hcd and address 2
Mar 14 09:26:18 localhost drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1064
Mar 14 09:26:18 localhost usbcore: registered new driver usbhid
Mar 14 09:26:18 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar 14 09:26:18 localhost Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
Mar 14 09:26:18 localhost ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Mar 14 09:26:18 localhost ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
Mar 14 09:26:18 localhost PCI: Setting latency timer of device 0000:00:06.0 to 64
Mar 14 09:26:18 localhost intel8x0_measure_ac97_clock: measured 56705 usecs
Mar 14 09:26:18 localhost intel8x0: clocking to 47474
Mar 14 09:26:18 localhost ALSA device list:
Mar 14 09:26:18 localhost #0: NVidia nForce2 with ALC650F at 0xdf000000, irq 16
Mar 14 09:26:18 localhost oprofile: using NMI interrupt.
Mar 14 09:26:18 localhost NET: Registered protocol family 2
Mar 14 09:26:18 localhost IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 14 09:26:18 localhost TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Mar 14 09:26:18 localhost TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Mar 14 09:26:18 localhost TCP: Hash tables configured (established 131072 bind 65536)
Mar 14 09:26:18 localhost TCP reno registered
Mar 14 09:26:18 localhost ip_conntrack version 2.4 (7168 buckets, 57344 max) - 212 bytes per conntrack
Mar 14 09:26:18 localhost ip_tables: (C) 2000-2002 Netfilter core team
Mar 14 09:26:18 localhost ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Mar 14 09:26:18 localhost arp_tables: (C) 2002 David S. Miller
Mar 14 09:26:18 localhost TCP bic registered
Mar 14 09:26:18 localhost NET: Registered protocol family 1
Mar 14 09:26:18 localhost NET: Registered protocol family 17
Mar 14 09:26:18 localhost Using IPI Shortcut mode
Mar 14 09:26:18 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar 14 09:26:18 localhost VFS: Mounted root (ext3 filesystem) readonly.
Mar 14 09:26:18 localhost Freeing unused kernel memory: 196k freed
Mar 14 09:26:18 localhost kjournald starting. Commit interval 5 seconds
Mar 14 09:26:18 localhost Adding 1004020k swap on /dev/hdb1. Priority:-1 extents:1 across:1004020k
Mar 14 09:26:18 localhost EXT3 FS on hda2, internal journal
Mar 14 09:26:18 localhost ndiswrapper version 1.2 loaded (preempt=yes,smp=yes)
Mar 14 09:26:18 localhost ndiswrapper: driver netrtusb (D-Link,04/01/2004, 1.00.00.0000) loaded
Mar 14 09:26:18 localhost wlan0: ndiswrapper ethernet device 00:13:46:e5:a9:9b using driver netrtusb, configuration file 2001:3C00.0.conf
Mar 14 09:26:18 localhost wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP
Mar 14 09:26:18 localhost usbcore: registered new driver ndiswrapper
Mar 14 09:26:18 localhost EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Mar 14 09:26:18 localhost kjournald starting. Commit interval 5 seconds
Mar 14 09:26:18 localhost EXT3 FS on hdb2, internal journal
Mar 14 09:26:18 localhost EXT3-fs: mounted filesystem with ordered data mode.
Mar 14 09:26:18 localhost cron[6306]: (CRON) STARTUP (V5.0)
Mar 14 09:26:19 localhost init: Activating demand-procedures for 'A'
Mar 14 09:26:28 localhost ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Mar 14 09:26:28 localhost ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
Mar 14 09:26:28 localhost NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
Mar 14 09:26:29 localhost agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Mar 14 09:26:29 localhost agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Mar 14 09:26:29 localhost agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
Mar 14 09:26:29 localhost agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Mar 14 09:26:29 localhost agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Mar 14 09:26:29 localhost agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
Mar 14 09:26:44 localhost kde(pam_unix)[6600]: session opened for user andreas by (uid=0)
Mar 14 09:27:13 localhost (andreas-6713): starting (version 2.12.1), pid 6713 user 'andreas'
Mar 14 09:27:13 localhost (andreas-6713): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 14 09:27:13 localhost (andreas-6713): Resolved address "xml:readwrite:/home/andreas/.gconf" to a writable configuration source at position 1
Mar 14 09:27:13 localhost (andreas-6713): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

6

14.03.2006, 16:01

Was wurde denn bei dem update alles aktuallisiert? Hast du mal etc-update durchlaufen lassen?
Updates mache ich z.B. immer so:

1. emerge --sync && emerge -uNDav world
2. etc-update && env-update && source /etc/profile && revdep-rebuild

Nicht alle Befehle muss man nach jedem update ausführen, aber so bin ich bis jetzt am besten mit Gentoo gefahren.
Ach keine Ahnung!

7

14.03.2006, 17:45

hast du von der Powermanagement Guide das Powermanagement für WLAN konfiguriert? Dann kommen die Melden evtl von dem pm.eth0 Script das in einem deiner Runlevel ist.
Mach doch mal rc-update del pm.eth0 und teste das Booten dann. Kann sein, dass das Problem auftritt, weil zu dem Zeitpunkt mit deiner WLAN-Konfiguration irgendwas noch nicht stimmt
Gentoo 2.6.16-r1 @ IBM Thinkpad T43

8

14.03.2006, 19:56

die fehlermeldung kommt direkt nach "starting vixie-cron"

habe "rc-update del pm.eth0" ausgeführt
Meldung:

* pm.eth0 not found in any of the specified runlevels.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

9

14.03.2006, 20:04

Hurra die Meldung ist verschwunden

ich habe etc-update ausgeführt.

Vielen Dank

Andreas
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W