Sie sind nicht angemeldet.

1

15.06.2006, 14:37

USB - Stick zum laufen bringen

Hallo allerseits,

Ich versuche zur Zeit meinen USB-Stick zu mounten. Den Kernel (2.6) habe ich wie in http://de.gentoo-wiki.com/USB_Mass_Storage_Ger%C3%A4te beschrieben konfiguriert und meine Ausgabe von dmesg | grep usb sieht wie folgt aus:

Zitat

usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbmon: debugfs is not available
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2.3: new full speed USB device using uhci_hcd and address 3
usb 4-2.3: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usb-storage: device scan complete
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete

bzw. mit grep:

Zitat

usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: USB 2.0 Model: Flash Disk Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete


Scheint also soweit alles richtig erkannt zu sein.

Bei meinen Mountversuchen kommt aber folgender Fehler:

Zitat

mount /dev/sda -t vfat /mnt/usb
mount: /dev/sda is not a valid block device
#und:
mount /dev/sda1 -t vfat /mnt/usb
mount: /dev/sda1 is not a valid block device

Über diesen Fehler hab ich schon einige Beiträge in anderen Foren gefunden, aber keiner beinhaltete einen Lösungsvorschlag der mir helfen konnte.

Ich wäre euch dankbar wenn ihr mir sagen könntet woran das liegt, bzw. wie man erkennt worauf das System den USB-Stick gelegt hat.

#######Nachtrag fstab:

Zitat

/dev/sda1 /mnt/usb auto noauto,user 0 0
/dev/sda /mnt/usbstick auto noauto,userq 0 0


Viele Grüße.

Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Amfortas« (15.06.2006, 15:28)


2

15.06.2006, 14:47

Hallo,

du bist sicher, dass du SCSI im Kernel hast?

3

15.06.2006, 15:01

Ja die CONFIG_SCSI ist garantiert im Kernel. Auch USB Massenspeicher, etc. ist drinnen.
Hab mittlerweile sogar schon viel zu viel reinkompiliert weil ich schon so frustriert war und sicher gehen wollte, dass alles drinnen ist..;)

4

15.06.2006, 15:13

Hallo !!

Was genau sagt eigentlich fdisk -l ?
Ist der Stick formatiert ?

Hier mal n Auszug aus meiner fstab:

Zitat


/dev/sda1 /mnt/usb vfat user,noauto,rw 0 0


dmesg sieht genauso aus.

5

15.06.2006, 15:14

da ist es doch schon ratsamer denn je den genkernel zu nehmen =)

sei[ drum ..
mein usb stick lief nach der konotralisierung des folgenden wiki.pradds:

http://de.gentoo-wiki.com/Automatisches_Mounten

habe die autoFS Methode benutzt, um nicht immer jede CD neu mounten zu müssen ..
der Nebeneffekt hatte, damit mein USB Stick auch automatisch erkannt wurde. .
/media/namedessticks

is vielleicht auch wat für disch ;)
System:
i7 P2600 @ 3,4GHz
jabber: poedel@jabber.ccc.de

6

15.06.2006, 15:25

@Poedel: Ach das überflüssig reinkompilierte schmeiß ich ja wieder raus wenns dann funktioniert..;)

Meine fstab hatte ich folgendermaßen bearbeitet:

Zitat


/dev/sda1 /mnt/usb auto noauto,user 0 0
/dev/sda /mnt/usbstick auto noauto,userq 0 0


Beide Einträge damit mir der Stick auf keinen Fall entkommen kann..
Das Auto hatt ich auch schon mit vfat ersetzt, aber daran sollts ja nicht liegen.
Der Stick ist fat und funktioniert auf Windwos tadellos.

fdisk -l sagt mir dass ich nur die Festplatte habe und vom USB-Stick keine Spur.

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Amfortas« (15.06.2006, 15:30)


7

15.06.2006, 18:27

Das würd ja eigentlich auch garnicht so schlecht aussehen:

Zitat

cat /proc/scsi/usb-storage/5
Host scsi5: usb-storage
Vendor: VIVANCO
Product: VivaDrive Pro
Serial Number: 20050715016000000070
Protocol: Transparent SCSI
Transport: Bulk
Quirks:


Zitat

cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: Flash R/W Rev: 2002
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: VIVANCO Model: VivaDrive Pro Rev: 3000
Type: Direct-Access ANSI SCSI revision: 02


Bin echt total aufgeschmissen..:(

Vielleicht kann mir ja wer seine .config schicken, damit ich sie mit meinen Kerneleinstellungen vergleichen kann, falls es doch am Kernel liegt.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Amfortas« (15.06.2006, 23:07)


8

17.06.2006, 15:02

gib doch mal an der konsole" lsusb -v "ein
und poste dann dies mal
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

9

17.06.2006, 19:07

Zitat

Original von Amfortas
/dev/sda1 /mnt/usb auto noauto,user 0 0
/dev/sda /mnt/usbstick auto noauto,userq 0 0


Dieses q muss da 'mal weg...

10

18.06.2006, 20:22

So hier mal die Ausgabe von lsusb:

Zitat

Bus 004 Device 003: ID 0483:1307 SGS Thomson Microelectronics Cytronix 6in1 card
reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x0483 SGS Thomson Microelectronics
idProduct 0x1307 Cytronix 6in1 card reader
bcdDevice 1.70
iManufacturer 1 Generic
iProduct 2 USBMass Storage Device
iSerial 3 ABCDEF0123456789
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0

Bus 004 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0x2036 TUSB2036 Hub
bcdDevice 1.01
iManufacturer 0
iProduct 1 General Purpose USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1 General Purpose USB Hub
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 1 General Purpose USB Hub
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0000
Ganged power switching
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0xb7
PortPwrCtrlMask 0xe0
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.16-gentoo-r9 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xb7
PortPwrCtrlMask 0xe0
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.16-gentoo-r9 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xb7
PortPwrCtrlMask 0xe0
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.16-gentoo-r9 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xb7
PortPwrCtrlMask 0xe0
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power

Bus 001 Device 003: ID 090c:1000 Feiya Technology Corp. Memory Bar
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x090c Feiya Technology Corp.
idProduct 0x1000 Memory Bar
bcdDevice 30.00
iManufacturer 1 VIVANCO
iProduct 2 VivaDrive Pro
iSerial 3 20050715016000000070
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.16-gentoo-r9 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xb7
PortPwrCtrlMask 0xe0
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0000


Wobei das auf Port 4 der USB-Stick ist, oder zumindest ist auf Port 4 nichts mehr, wenn ich den USB-Stick rausziehe

Zitat

Dieses q muss da 'mal weg...

Das hatte ich garnicht drinnen, is irgendwie beim reinkopieren passiert

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Amfortas« (18.06.2006, 20:25)


11

18.06.2006, 21:10

gib mal bitte den Befehl

lsusb -v

in die Konsole ein.

nur lsusb reicht mir zur kontrolle nicht aus.

und gib mal den Befehl

lspci -v

in die Konsole ein.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-13/gcc Version 4.6.3/KDE-Version 4.12.5/Kernel version 3.7.10
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »andreasullrich« (18.06.2006, 21:12)


12

18.06.2006, 21:53

das auf der Vorseite war lsusb -v.

lspci -v sieht wie folgt aus:

Zitat

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 0

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 0

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800
Capabilities: [d0] Power Management version 1

00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1840

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1860

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e07fffff
Prefetchable memory behind bridge: 30000000-33ffffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 1810
Memory at 34000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: medium devsel, IRQ 10
I/O ports at 1880

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: medium devsel, IRQ 10
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2

02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at e0204000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2

02:04.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corporation MIM2000/Centrino
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e0206000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

02:06.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
Memory at e0207000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 36000000-37fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001

02:06.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
Memory at e0208000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 32000000-33fff000 (prefetchable)
Memory window 1: 38000000-39fff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
16-bit legacy interface ports at 0001

02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0035
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e0209000 (32-bit, non-prefetchable) [size=2K]
Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2


Auf jeden Fall mal danke für die Hilfe, egal obs was wird..:)