Sie sind nicht angemeldet.

Suspend2 cpufreq Probleme

Lieber Besucher, herzlich willkommen bei: GentooForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

007sascha

Anfänger

  • »007sascha« ist männlich
  • »007sascha« ist der Autor dieses Themas

Beiträge: 24

  • Nachricht senden

1

03.12.2005, 19:18

Suspend2 cpufreq Probleme

Hallo zusammen,
ich möchte bei meinem Laptop Supend2 installieren und auch nutzen, leider habe ich ein paar Probleme damit.
SoftwareSuspend2 ist im Kernel eingebunden.
Hibernate-Skipt ist ebenfalls installiert.

Wenn ich nun über /usr/sbin/hibernate versuche in den Supend zu schalten versucht gentoo das auch aber er beendet den Vorgang und kommt wieder zurück.
Kann mir jemand sagen was ich noch falsch mache?

hibernate.log sieht normal aus

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

Starting suspend at Sa Dez 3 19:10:41 CET 2005
hibernate: [01] Executing CheckLastResume ... 
hibernate: [01] Executing LockFileGet ... 
hibernate: [01] Executing NewKernelFileCheck ... 
hibernate: [10] Executing EnsureSwsusp2Capable ... 
hibernate: [11] Executing XHacksSuspendHook1 ... 
hibernate: [20] Executing MiscLaunchAuxFunc1 ... 
Executing echo "Und tschüss!"...
Und tschüss!
hibernate: [89] Executing SaveKernelModprobe ... 
hibernate: [91] Executing LockXScreensaver ... 
xscreensaver-command: activating and locking.

hibernate: [91] Executing ModulesUnloadBlacklist ... 
hibernate: [95] Executing XHacksSuspendHook2 ... 
hibernate: [97] Executing ChangeToSwsuspVT ... 
hibernate: [98] Executing Swsusp2ConfigSet ... 
hibernate: [99] Executing DoSwsusp2 ... 
hibernate: Activating suspend ...
hibernate: [97] Executing ChangeFromSwsuspVT ... 
hibernate: [91] Executing GentooModulesAutoload ... 
Loading modules listed /etc/modules.autoload.d/kernel-2.6
Loading cpufreq_performance
Loading cpufreq_powersave
Loading cpufreq_ondemand
Loading cpufreq_conservative
hibernate: [90] Executing ModulesLoad ... 
hibernate: [89] Executing RestoreKernelModprobe ... 
hibernate: [85] Executing XHacksResumeHook2 ... 
hibernate: [70] Executing ClockRestore ... 
hibernate: [30] Executing UnlockXScreensaver ... 
xscreensaver-command: deactivating.

hibernate: [20] Executing MiscLaunchAuxFunc2 ... 
Executing echo "Da bin ich wieder!"...
hibernate: [11] Executing XHacksResumeHook1 ... 
hibernate: [01] Executing NoteLastResume ... 
hibernate: [01] Executing LockFilePut ... 
hibernate: [00] Executing RemoveSwsuspProcCruft ... 
Da bin ich wieder!
Resumed at Sa Dez 3 19:11:14 CET 2005


Aber messages bringt einige Fehler mit cpufreq

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118

Dec  3 19:10:46 gentoo Software Suspend 2.2-rc6: Swapwriter: Signature found.
Dec  3 19:10:46 gentoo Software Suspend 2.2-rc6: Suspending enabled.
Dec  3 19:10:46 gentoo Software Suspend 2.2-rc6: Initiating a software suspend cycle.
Dec  3 19:10:46 gentoo suspend_userui: userui_program not configured. suspend_userui disabled.
Dec  3 19:10:46 gentoo Software Suspend 2.2-rc6: Swapwriter: Signature found.
Dec  3 19:10:46 gentoo Software Suspend 2.2-rc6: Suspending enabled.
Dec  3 19:10:46 gentoo Freezing processes
Dec  3 19:11:13 gentoo Preparing Image.
Dec  3 19:11:13 gentoo Starting to save the image..
Dec  3 19:11:13 gentoo Writing caches...
Dec  3 19:11:13 gentoo 20%...40%...60%...80%...100%...done.
Dec  3 19:11:13 gentoo Doing atomic copy.
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.3 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.1 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.0 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1f.5 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Dec  3 19:11:13 gentoo cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
Dec  3 19:11:13 gentoo cpufreq: resume failed to assert current frequency is what timing core thinks it is.
Dec  3 19:11:13 gentoo WARNING: Interrupts reenabled while resuming sysdev class specific driver irqrouter0.
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.0 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.1 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.2 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.7 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1e.0 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1f.5 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1f.6 to 64
Dec  3 19:11:13 gentoo tg3: eth0: Link is down.
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo Yenta O2: res at 0x94/0xD4: ea/00
Dec  3 19:11:13 gentoo Yenta O2: enabling read prefetch/write burst
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo tg3: eth0: Link is up at 100 Mbps, full duplex.
Dec  3 19:11:13 gentoo tg3: eth0: Flow control is on for TX and on for RX.
Dec  3 19:11:13 gentoo Writing kernel & process data...
Dec  3 19:11:13 gentoo 20%...40%...60%...80%...100%...done.
Dec  3 19:11:13 gentoo Seeking to enter ACPI state
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.3 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.1 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:02:06.0 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1f.5 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Dec  3 19:11:13 gentoo ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Dec  3 19:11:13 gentoo cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
Dec  3 19:11:13 gentoo Failed to enter state.
Dec  3 19:11:13 gentoo cpufreq: resume failed to assert current frequency is what timing core thinks it is.
Dec  3 19:11:13 gentoo WARNING: Interrupts reenabled while resuming sysdev class specific driver irqrouter0.
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.0 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.1 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.2 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1d.7 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1e.0 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1f.5 to 64
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo PCI: Setting latency timer of device 0000:00:1f.6 to 64
Dec  3 19:11:13 gentoo tg3: eth0: Link is down.
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo Yenta O2: res at 0x94/0xD4: ea/00
Dec  3 19:11:13 gentoo Yenta O2: enabling read prefetch/write burst
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Dec  3 19:11:13 gentoo ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Dec  3 19:11:13 gentoo tg3: eth0: Link is up at 100 Mbps, full duplex.
Dec  3 19:11:13 gentoo tg3: eth0: Flow control is on for TX and on for RX.
Dec  3 19:11:13 gentoo Reading caches...
Dec  3 19:11:13 gentoo 20%...40%...60%...80%...100%...done.
Dec  3 19:11:13 gentoo Software Suspend 2.2-rc6: Suspend failed, trying to recover...
Dec  3 19:11:13 gentoo Please include the following information in bug reports:
Dec  3 19:11:13 gentoo - SUSPEND core   : 2.2-rc6
Dec  3 19:11:13 gentoo - Kernel Version : 2.6.13-suspend2-r4
Dec  3 19:11:13 gentoo - Compiler vers. : 3.4
Dec  3 19:11:13 gentoo - Attempt number : 4
Dec  3 19:11:13 gentoo - Pageset sizes  : 19223 (19223 low) and 80510 (80510 low).
Dec  3 19:11:13 gentoo - Parameters     : 0 32 0 1 0 5
Dec  3 19:11:13 gentoo - Calculations   : Image size: 49973. Ram to suspend: 2709.
Dec  3 19:11:13 gentoo - Limits         : 188128 pages RAM. Initial boot: 178328.
Dec  3 19:11:13 gentoo - Overall expected compression percentage: 50.
Dec  3 19:11:13 gentoo - Compressor lzf enabled.
Dec  3 19:11:13 gentoo Compressed 408506368 bytes into 201892094 (50 percent compression).
Dec  3 19:11:13 gentoo - Swapwriter active.
Dec  3 19:11:13 gentoo Swap available for image: 194786 pages.
Dec  3 19:11:13 gentoo - SMP kernel.
Dec  3 19:11:13 gentoo - Max extents used: 8
Dec  3 19:11:13 gentoo - I/O speed: Write 49 MB/s, Read 42 MB/s.


Hier noch meine hibernate.conf

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170

# Example hibernate.conf file. Adapt to your own tastes.
# Options are not case sensitive.
# 
# Run "hibernate -h" for help on the configuration items.

##############################################################################
### Choose your Suspend method. You currently have 3 choices:
###
###    suspend2            Software Suspend 2 (requires kernel patches from
###                        http://www.suspend2.net/)
###
###    sysfs_power_state   Uses /sys/power/state to suspend (activates pmdisk
###                        on kernels < 2.6.8, or vanilla swsusp otherwise).
###
###    acpi_sleep          Uses /proc/acpi/sleep to activate swsusp, or other
###                        ACPI sleep state supported by your machine.
###
##############################################################################

### suspend2 (for Software Suspend 2)
UseSuspend2 yes
Reboot no
EnableEscape yes
DefaultConsoleLevel 1
Compressor lzf
Encryptor none
# ImageSizeLimit 200
## useful for initrd usage:
SuspendDevice swap:/dev/hda3
## Powerdown method - 3 for suspend-to-RAM, 4 for ACPI S4 sleep, 5 for poweroff
PowerdownMethod 5
## Any other /proc/software_suspend setting can be set like so:
ProcSetting expected_compression 50
## Or traditionally like this:
Suspend2AllSettings 0 0 2056 65535 5
## Or even from the results of hibernate --save-settings with this:
# Suspend2AllSettingsFile /etc/hibernate/suspend-settings.conf
## For filewriter:
# FilewriterLocation /suspend_file 1000
# VerifyFilewriterResume2 yes
# ProcSetting userui_program /sbin/suspend2ui_text

### sysfs_power_state
## To use /sys/power/state to suspend your machine (which may offer
## suspend-to-RAM, suspend-to-disk, standby, etc) comment out all the options
## above for Software Suspend 2, below for acpi_sleep, and uncomment this line.
## You may replace mem with any one of the states from "cat /sys/power/state"
# UseSysfsPowerState mem
# PowerdownMethod shutdown

### acpi_sleep
## To use ACPI to suspend your machine (via /proc/acpi/sleep), comment out
## all the options above for Software Suspend 2 and sysfs, and uncomment this
## line. The number refers to the ACPI sleep state - 3 is suspend-to-RAM and
## 4 is suspend-to-disk.
# UseACPISleep 4

##############################################################################
### Some global settings
##############################################################################

Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution gentoo
# XDisplay :0

##############################################################################
### Scriptlets
###   Scriptlets provide support for doing all sorts of things before and after
###   suspending. The defaults settings here should work for most people, but
###   you may wish to edit these to taste. Consult "hibernate -h" for help on
###   the configuration settings.
##############################################################################

### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg

### clock
SaveClock restore-only

### devices
# IncompatibleDevices /dev/dsp /dev/video*

### diskcache
# DisableWriteCacheOn /dev/hda

### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2

### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows

### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak

### hardware_tweaks
# IbmAcpi yes
# RadeonTool yes

### lilo
# EnsureLILOResumes yes

### lock (generally you only want one of the following options)
# LockConsoleAs root
LockXScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes

### misclaunch
OnSuspend 20 echo "Und tschüss!"
OnResume 20 echo "Da bin ich wieder!"

### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules ye
# UnloadModules cpufreq_performance cpufreq_powersave cpufreq_ondemand cpufreq_conservative
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules

### modules-gentoo
GentooModulesAutoload yes

### network
# DownInterfaces eth0
# UpInterfaces auto

### pcmcia
# EjectCards yes

### programs
# IncompatiblePrograms xmms

### services
# RestartServices postfix
# StopServices alsasound
# StartServices aumix

### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes

### xhacks
SwitchToTextMode yes
# UseDummyXServer yes

### xstatus
## This can be set to gnome, kde or x:
# XStatus gnome
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font -misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-* --colour=Green --shadow 1 --pos bottom --align center --offset 50


Ich wäre euch sehr dankbar wenn ihr mir weiterhelfen könntet.
MFG Sascha

007sascha

Anfänger

  • »007sascha« ist männlich
  • »007sascha« ist der Autor dieses Themas

Beiträge: 24

  • Nachricht senden

2

09.12.2005, 13:44

Hat den keiner eine Idee?
MFG Sascha

Häufig verwendete Suchbegriffe:

www.my-echo.de mobile-parts-discount.net Andere Architekturen Lob & Kritik Gentoo Linux bka trojaner finden Emerge Probleme softwaregarage.de Drucker Linux Computer und Notebooks