Sie sind nicht angemeldet.

keine hardwarebeschleunigung mit ati 9800xt

Lieber Besucher, herzlich willkommen bei: GentooForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

Hepheistos

Anfänger

  • »Hepheistos« ist männlich
  • »Hepheistos« ist der Autor dieses Themas

Beiträge: 9

  • Nachricht senden

1

08.12.2005, 21:17

keine hardwarebeschleunigung mit ati 9800xt

hallo zusammen!

ich schlage mich schon seit tagen erfolglos mit der hardwarebeschleunigung meiner grafikkarte (ati 9800xt) herum, bekomme sie aber nicht zum laufen und kann auch den fehler nicht finden:

symptome:
nach dem starten des x-servers friert das bild ein, wobei der hintergrund "zerhackt" ist. eine zeit lang kann noch der mauszeiger bewegt werden, bis auch das nicht mehr geht. es hilft dann nur noch der druck auf die reset-taste.

system:
ati radeon 9800xt
kernel 2.6.11
xorg 6.8.2
ati-drivers 8.19.10

bei der installation hab ich mich an die beschreibung von http://gentoo-wiki.com/HOWTO_ATI_Drivers gehalten.

mttr ist im kernel einkompiliert, agpgart und intel-agp als modul. als framebuffer verwende ich vesa.

dmesg liefert keine fehler, soweit ich gesehen habe:

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260

Linux version 2.6.11-gentoo-r6 (root@lemnos) (gcc-Version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #4 Mon Dec 5 09:33:38 CET 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131052
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126956 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5270
ACPI: RSDT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0
ACPI: BOOT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec030
ACPI: MADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec058
ACPI: DSDT (v001   ASUS P4B533   0x00001000 MSFT 0x0100000b) @ 0x00000000
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: 
Initializing CPU#0
CPU 0 irqstacks, hard=c055e000 soft=c055d000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2424.243 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514072k/524208k available (3157k kernel code, 9596k reserved, 1111k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4784.12 BogoMIPS (lpj=2392064)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e60)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1ea0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
pnp: 00:01: ioport range 0xec00-0xec3f has been reserved
pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:0c: ioport range 0x3f0-0x3f1 has been reserved
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1134066131.960:0): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/O].
Initializing Cryptographic API
lp: driver loaded but no devices found
vesafb: ATI Technologies Inc., R360, 01.00 (OEM: ATI R360)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:57b3
vesafb: pmi: set display start = c00c5847, set palette = c00c5893
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 600k, total 16384k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL-8029 found at 0x8000, IRQ 10, 00:E0:7D:8D:A4:4C.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:02:0d.0[A] -> GSI 9 (level, low) -> IRQ 9
eth1: RealTek RTL8139 at 0x8400, 00:00:cb:59:67:a8, IRQ 9
eth1:  Identified 8139 chip type 'RTL-8139C'
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: IC35L060AVER07-0, ATA DISK drive
hdb: Maxtor 53073U6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 120103200 sectors (61492 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
hdb: cache flushes not supported
 hdb: hdb1 hdb2 hdb3 hdb4
hdd: ATAPI 6X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 9 (level, low) -> IRQ 9
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 9, pci mem 0xc5000000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0xb800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0xb400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 10, io base 0xb000
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
gameport: pci0000:02:0b.1 speed 978 kHz
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI interrupt 0000:02:0c.1[A] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 9 (level, low) -> IRQ 9
ALSA device list:
  #0: Brooktree Bt878 at 0xc6800000, irq 6
  #1: Sound Blaster Live! (rev.10, serial:0x100a1102) at 0x9000, irq 9
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 
PCI0 PCI1 PCI2 UAR1 USB0 USB1 USB2 US20 AC97 
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
ReiserFS: hdb3: using ordered data mode
ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb3: checking transaction log (hdb3)
ReiserFS: hdb3: replayed 6 transactions in 0 seconds
ReiserFS: hdb3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
Adding 1000432k swap on /dev/hdb2.  Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xe0000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 8.19.10 [Nov  9 2005] on minor 0
[fglrx] ACPI power management is initialized.


gleiches gilt für Xorg.0.log:

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r6 i686 [ELF] 
Current Operating System: Linux lemnos 2.6.11-gentoo-r6 #4 Mon Dec 5 09:33:38 CET 2005 i686
Build Date: 04 December 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec  8 19:17:02 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 1043,8088 rev 11 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1043,8089 rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e4a card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e6a card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0a:0: chip 1095,0649 card 1095,0649 rev 02 class 01,04,00 hdr 00
(II) PCI: 02:0b:0: chip 1102,0002 card 1102,100a rev 0a class 04,01,00 hdr 80
(II) PCI: 02:0b:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 02:0c:0: chip 109e,036e card 0070,13eb rev 02 class 04,00,00 hdr 80
(II) PCI: 02:0c:1: chip 109e,0878 card 0070,13eb rev 02 class 04,80,00 hdr 80
(II) PCI: 02:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:0e:0: chip 10ec,8029 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xc5800000 - 0xc67fffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xc8000000 - 0xdfffffff (0x18000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x00008000 - 0x000080ff (0x100) IX[B]
	[1] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[2] -1	0	0x00008800 - 0x000088ff (0x100) IX[B]
	[3] -1	0	0x00008c00 - 0x00008cff (0x100) IX[B]
	[4] -1	0	0x00009000 - 0x000090ff (0x100) IX[B]
	[5] -1	0	0x00009400 - 0x000094ff (0x100) IX[B]
	[6] -1	0	0x00009800 - 0x000098ff (0x100) IX[B]
	[7] -1	0	0x00009c00 - 0x00009cff (0x100) IX[B]
	[8] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[9] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[B]
	[10] -1	0	0x0000a800 - 0x0000a8ff (0x100) IX[B]
	[11] -1	0	0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xc4800000 - 0xc4ffffff (0x800000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xc6800000 - 0xc7ffffff (0x1800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4e4a) rev 0, Mem @ 0xd8000000/27, 0xc6000000/16, I/O @ 0xd800/8, BIOS @ 0xd7fe0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4e6a) rev 0, Mem @ 0xc8000000/27, 0xc5800000/16
(--) PCI: (2:12:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xc7000000/12
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[1] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[2] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[3] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[4] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[5] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[6] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[7] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[8] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[9] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[10] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[11] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[12] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[13] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[14] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[15] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[16] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[17] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[18] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[19] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[20] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[21] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[22] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[23] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[24] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[25] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[1] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[2] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[3] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[4] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[5] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[6] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[7] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[8] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[9] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[10] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[11] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[12] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[13] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[14] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[15] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[16] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[17] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[18] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[19] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[20] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[21] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[22] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[23] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[24] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[25] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[6] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[7] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[8] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[11] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[13] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[14] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[19] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[20] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[21] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[22] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[23] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[24] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[25] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[26] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[28] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[29] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[30] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[31] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[32] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.19.10
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50),
	MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
	FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
	MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
	RADEON X850 XT Platinum Edition (R480 5D4D),
	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
	FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
	RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
	MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
	RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
	RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
	RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
	RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
	RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.19.10
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.19g1                           
(II) ATI Proprietary Linux Driver Build Date: Nov  9 2005 17:51:16
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.19.1-driver-lnx-226030
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9800 XT (R360 4E4A) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[6] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[7] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[8] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[11] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[13] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[14] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[19] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[20] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[21] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[22] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[23] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[24] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[25] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[26] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[28] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[29] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[30] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[31] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[32] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8212550
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[6] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[7] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[8] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[11] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[12] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[13] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[14] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[22] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[23] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[24] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[25] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[26] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[27] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[28] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[29] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[30] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[31] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[32] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[33] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[34] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[35] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ForceMonitors" "notv"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9800 XT (R360 4E4A)" (Chipset = 0x4e4a)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xc6000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/modules/linux/libdrm.a
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(**) fglrx(0): ForceMonitors Settings: 400
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ___  Model: a995  Serial#: 3831
(II) fglrx(0): Year: 2000  Week: 37
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36  vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340   greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064   whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 85  vid: 22913
(II) fglrx(0): #4: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) fglrx(0): #5: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) fglrx(0): Ranges: V min: 50  V max: 150 Hz, H min: 30  H max: 95 kHz, PixClock max 200 MHz
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 78.8 MHz   Image Size:  310 x 240 mm
(II) fglrx(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 78.8 MHz   Image Size:  310 x 240 mm
(II) fglrx(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 78.8 MHz   Image Size:  310 x 240 mm
(II) fglrx(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Connected Display2: CRT on secondary DAC
(II) fglrx(0):  Display2: No EDID information from DDC.
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Secondary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3.  3 power states available:
(II) fglrx(0):   1. 419/365MHz @ 50Hz [enable load balancing, overdrive]
(II) fglrx(0):   2. 419/365MHz @ 50Hz [overclocked, enable load balancing, overdrive]
(II) fglrx(0):   3. 419/365MHz @ 50Hz [overclocked, enable load balancing, overdrive]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 47 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072
(**) fglrx(0):  Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
(**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808
(**) fglrx(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
(**) fglrx(0):  Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814 +hsync
(**) fglrx(0):  Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768"  100.19  1024 1088 1200 1376  768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"   56.25  800 832 896 1048  600 601 604 631
(**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"   29.61  800 816 896 992  600 601 604 635 interlace +hsync
(**) fglrx(0):  Default mode "800x600": 84.0 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600"   83.95  800 856 944 1088  600 601 604 643 +hsync
(**) fglrx(0):  Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"   68.18  800 848 936 1072  600 601 604 636 +hsync
(**) fglrx(0):  Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"   60.06  800 840 928 1056  600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"   52.41  640 680 744 848  480 481 484 515 +hsync
(**) fglrx(0):  Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"   43.16  640 680 744 848  480 481 484 509 +hsync
(**) fglrx(0):  Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"   37.89  640 672 736 832  480 481 484 506 +hsync
(**) fglrx(0):  Default mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907 +hsync
(**) fglrx(0):  Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.77  1152 1224 1344 1536  864 865 868 900 +hsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   64.68  1152 1208 1328 1504  864 865 868 915 interlace +hsync
(**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   58.29  1152 1200 1320 1488  864 865 868 911 interlace +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(II) fglrx(0): Total of 9 modes found for secondary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (90, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.19.10
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000978
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xc6000000 - 0xc600ffff (0x10000) MX[B]
	[1] 0	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xc4800000 - 0xc48000ff (0x100) MX[B]
	[8] -1	0	0xc6800000 - 0xc6800fff (0x1000) MX[B]
	[9] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[10] -1	0	0xc5000000 - 0xc50003ff (0x400) MX[B]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[12] -1	0	0xc7000000 - 0xc7000fff (0x1000) MX[B](B)
	[13] -1	0	0xc5800000 - 0xc580ffff (0x10000) MX[B](B)
	[14] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[15] -1	0	0xd7fe0000 - 0xd7ffffff (0x20000) MX[B](B)
	[16] -1	0	0xc6000000 - 0xc600ffff (0x10000) MX[B](B)
	[17] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[21] 0	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x00008000 - 0x0000801f (0x20) IX[B]
	[25] -1	0	0x00008400 - 0x000084ff (0x100) IX[B]
	[26] -1	0	0x00008800 - 0x00008807 (0x8) IX[B]
	[27] -1	0	0x00009000 - 0x0000901f (0x20) IX[B]
	[28] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[29] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[30] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[31] -1	0	0x0000a400 - 0x0000a403 (0x4) IX[B]
	[32] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[33] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[34] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[35] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[36] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[37] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[38] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area:     0xd8701000 (size=0x078ff000)
(II) fglrx(0): UMM area:     0xd8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0aae000
(II) fglrx(0): [drm] mapped SAREA 0xe0aae000 to 0xb7b48000
(II) fglrx(0): [drm] framebuffer handle = 0xd8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.19.10
(II) fglrx(0):     Date: Nov  9 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.11-gentoo-r6
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xc6000000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x1a30
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe0d81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1 
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded


meine xorg.conf sieht wie folgt aus (ohne kommentare):

Quellcode

 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146

Section "dri"
    Mode 0666
EndSection

Section "Module"
    Load        "dbe"  	# Double buffer extension

    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "freetype"

    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a
EndSection

Section "Files"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "ServerFlags"

EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"kbd"

    Option "AutoRepeat" "500 30"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"de"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"
EndSection

Section "Monitor"
    Identifier  "Monitor0"
EndSection

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "vga“
EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)" 
    Option "ScreenOverlap"              "0" 
    Option "ForceMonitors"		"notv"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4e4a
    Screen 0
EndSection

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier  "Server Layout"
    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

### EOF ###


was mach ich bloss falsch? ich hab mich schon durch hunderte seiten gewühlt, alles mögliche versucht und bin kurz vorm verzweifeln, auch weil ich eher ein linux-neuling bin.

speedpidi

Fortgeschrittener

  • »speedpidi« ist männlich

Beiträge: 175

  • Nachricht senden

2

08.12.2005, 21:34

soweit ich weiß gibt es ein problem mit den ati-treibern und dem fb bei wechsel von konsole nach x11 stürzt der rechner ab probier mal das x11 zu starten ohne vorher einen framebuffer für die konsole zu verwenden.
Dumm sind die Menschen die schlaue Zitate falsch auffassen und gegen sich verwendet sehen.
Schlaue Menschen lernen aus dummen Zitaten und verwenden sie konstruktiv.

Hepheistos

Anfänger

  • »Hepheistos« ist männlich
  • »Hepheistos« ist der Autor dieses Themas

Beiträge: 9

  • Nachricht senden

3

08.12.2005, 22:21

das ging ja schnell mit der antwort!

habe jetzt einen neuen kernel ohne framebuffer gebaut.
der einzige unterschied ist alledings, dass der x-server nach dem start mit schwarzem bildschirm einfriert.

Häufig verwendete Suchbegriffe:

www.my-echo.de mobile-parts-discount.net Andere Architekturen Lob & Kritik Gentoo Linux bka trojaner finden Emerge Probleme softwaregarage.de Drucker Linux Computer und Notebooks